Automatic forming line for left and right panels of freezer

Product introduction:

The forming line is mainly composed of automatic feeding machine, punching machine, rolling mill, end bending, blanking belt line, pneumatic system, hydraulic system and electric control system.

Note technical parameters:

Working beat: ≤ 25 seconds;

Height of equipment working face: 900mm from the ground;

Material used for workpiece: Q235A / 08F, thickness 0.5mm (equipment application range 0.45-0.6mm)

Maximum forming size of workpiece: b820 × H800

Minimum forming size of workpiece: B530 × H510

Capacitance: about 35KVA (380V, 50Hz);

Gas capacity: 0.5-0.65mpa;

Water source: Industrial tap water;